Yirong Lin is currently an Associate Professor at University of Texas at El Paso. he got his Ph.D. degree from ASU and Postdoc training from ASU and UF.

• Ph D in Mechanical Engineering, Arizona State Univerisity (2009)
• MS in Mechanical Engineering, Harbin Institute of Technology (2006)
• BS in Mechanical Engineering, Harbin Engineering University (2004)

• A deep learning-based approach to extraction of filler morphology in SEM images with the application of automated quality inspection Artificial Intelligence for Engineering Design, Analysis and Manufacturing 36 (2022), Md Fashiar Rahman, Tzu-Liang (Bill) Tseng, Jianguo Wu, Yuxin Wen, Yirong Lin.
• Chavez, L.A., Ibave, P., Hassan, M.S., Hall‐Sanchez, S.E., Billah, K.M.M., Leyva, A., Marquez, C., Espalin, D., Torres, S., Robison, T. and Lin, Y., 2022. Low‐temperature selective laser sintering 3D printing of PEEK‐Nylon blends: Impact of thermal post‐processing on mechanical properties and thermal stability. Journal of Applied Polymer Science, 139(23), p.52290 (in press), Yirong Lin.
• Hall, S.E., Centeno, V., Favela, S., Lopez, A., Gallardo, A., Pellicotte, J., Torres, Y., Coverdell, D., Torres, S., Choudhuri, A. and Lin, Y., 2022. Mechanical properties of high-temperature fiber-reinforced thermoset composites with plain weave and unidirectional carbon fiber fillers. Journal of Composites Science, 6(7), p.213 (in press), Yirong Lin.
• Hassan, M.S., Zaman, S., Rodriguez, A., Molina, L., Dominguez, C.E., Morgan, R., Bernardin, J. and Lin, Y., 2022. Direct ink write 3D printing of wave propagation sensor. Flexible and Printed Electronics, 7(4), p.045011 (in press), Yirong Lin.
• Renteria, A., Balcorta, V.H., Marquez, C., Rodriguez, A.A., Renteria-Marquez, I., Regis, J., Wilburn, B., Patterson, S., Espalin, D., Tseng, T.L.B. and Lin, Y., 2022. Direct ink write multi-material printing of PDMS-BTO composites with MWCNT electrodes for flexible force sensors. Flexible and Printed Electronics, 7(1), p.015001 (in press), Yirong Lin.
• Influence of bimodal particle distribution on material properties of BaTiO3 fabricated by paste extrusion 3D printing Ceramics International 47 13 (in press), Anabel Renteria, Luisa Garcia, Victor Balcorta, Dayna Ortiz, Luis Delfin, Jaime Regis, Mariana Marcos-Hernandez, David Espalin, Tzu-Liang (Bill) Tseng, Yirong Lin.
• Fabrication of bulk alumina structures with humidity sensing capabilities using direct ink write technique Rapid Prototyping Journal 27 4 (in press), Anabel Renteria, Luisa Garcia, Jorge Diaz, Luis Delfin, Jaime Regis, Elizabeth Reza, David Espalin, Tzu-Liang (Bill) Tseng, Yirong Lin.
• Paste extrusion 3D printing and characterization of lead zirconate titanate piezoelectric ceramics Ceramics International 47 15 (in press), Samuel Hall, Jaime Regis, Anabel Renteria, Luis Chavez, Luis Delfin, Sebastian Vargas, Michael R. Haberman, David Espalin, Ryan B. Wicker, Yirong Lin.
• Near-UV Light Assisted Green Reduction of Graphene Oxide Films through l-Ascorbic Acid. (2021), Jaime Regis, Sebastian Vargas, Andrea Irigoyen, Elsa Bramasco Rivera, Jose L. Banuelos, Luis C. Delfin, Anabel Renteria, Ulises Martinez, Tommy Rockward, Yirong Lin.
• Development of photocatalytic paint based on TiO2 and photopolymer resin for the degradation of organic pollutants in water SCIENCE OF THE TOTAL ENVIRONMENT 704 (2020), Md. T. Islam, Arieana Dominguez, Reagan S. Turley, Hoejin Kim, Kazi A. Sultana, Mai Shuvo, Bonifacio Alvarado-Tenorio, Milka O. Montes, Yirong Lin, Jorge Gardea-Torresdey, Juan C. Noveron.
• Synthesis of high surface area transition metal sponges and their catalytic properties NEW JOURNAL OF CHEMISTRY 43 25 (2019), Md. T. Islam, Jose Rosales, Ricardo Saenz-Arana, Roy Arrieta, Hoejin Kim, Kazi A. Sultana, Yirong Lin, Dino Villagran, Juan C. Noveron.
• Non-destructive optical second harmonic generation imaging of 3D printed aluminum nitride ceramics Ceramics International 45 (2019), Anglea C. Aguilar, Carlos A. Diaz-Moreno, Alex D. Price, Rajen K. Goutam, Cristian E. Botez, Yirong Lin, Ryan B. Wicker, Chunqiang Li.
• Binder jetting additive manufacturing of aluminum nitride components Ceramics International (2019), D\'iaz-Moreno, Carlos A., Yirong Lin, Hurtado-Mac\'ias, A., David Espalin, Cesar Terrazas, Lawrence E. Murr, Ryan B. Wicker.
• 3D printing of polyvinylidene fluoride/photopolymer resin blends for piezoelectric pressure sensing application using the stereolithography technique MRS Communications 9 3 (2019), Hoejin Kim, Luis C. Manriquez, Md T. Islam, Luis A. Chavez, Jaime E. Regis, Md A. Ahsan, Juan C. Noveron, Tzu-Liang B. Tseng, Yirong Lin.
• Binder jetting additive manufacturing of aluminum nitride components (2019), Carlos A. Diaz-Moreno, Yirong Lin, Alberto Hurtado-Macias, David Espalin, Cesar Terrazas, Lawrence E. Murr, Ryan B. Wicker.
• Development of photocatalytic paint based on TiO2 and photopolymer resin for the degradation of organic pollutants in water Science of The Total Environment (2019), Md T. Islam, Arieana Dominguez, Reagan S. Turley, Hoejin Kim, Kazi A. Sultana, MAI Shuvo, Bonifacio Alvarado-Tenorio, Milka O. Montes, Yirong Lin, Jorge Gardea-Torresdey, others.
• Particle size influence on material properties of BaTiO3 ceramics fabricated using freeze-form extrusion 3D printing (2019), Anabel Renteria, Jorge A. Diaz, Baitong He, Ivan A. Renteria-Marquez, Luis A. Chavez, Jaime E. Regis, Yingtao Liu, David Espalin, Tzu-Liang (Bill) Tseng, Yirong Lin.
• Synthesis of high-surface area transition metal sponges and their catalytic properties New Journal of Chemistry (2019), Md T. Islam, Jose Rosales, Saenz A. Ricardo, Roy Arrieta, Hoejin Kim, Kazi A. Sultana, Yirong Lin, Dino Villagran, Juan C. Noveron.
• 3D printing of Shape Memory Polymer (SMP)/Carbon Black (CB) nanocomposites with electro-responsive toughness enhancement Materials Research Express (2018), Carlos A. Rosales, Mario A. Garcia, Hoejin Kim, Luis A. Chavez, Deidra R. Hodges, Paras Mandal, Yirong Lin, Tzu-Liang B. Tseng.
• Adsorption of methylene blue and tetracycline onto biomass-based material prepared by sulfuric acid reflux RSC ADVANCES 8 57 (2018), Md. T. Islam, Ricardo Saenz-Arana, Cesar Hernandez, Thomas Guinto, Md A. Ahsan, Hoejin Kim, Yirong Lin, Bonifacio Alvarado-Tenorio, Juan C. Noveron.
• Adsorptive Removal of Sulfamethoxazole and Bisphenol A from Contaminated Water using Functionalized Carbonaceous Material Derived from Tea Leaves JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING 6 4 (2018), Md A. Ahsan, Md T. Islam, Cesar Hernandez, Hoejin Kim, Yirong Lin, Michael L. Curry, Jorge Gardea-Torresdey, Juan C. Noveron.
• Bimetallic CoMoS Composite Anchored to Biocarbon Fibers as a High-Capacity Anode for Li-Ion Batteries ACS OMEGA 3 8 (2018), Noemi Dominguez, Brenda Torres, Luis A. Barrera, Julio E. Rincon, Yirong Lin, Russell R. Chianelli, Md A. Ahsan, Juan C. Noveron.
• Biomass conversion of saw dust to a functionalized carbonaceous materials for the removal of Tetracycline, Sulfamethoxazole and Bisphenol A from water JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING 6 4 (2018), Md. A. Ahsan, Md. T. Islam, Cesar Hernandez, Edison A. Castro, Sai K. Katla, Hoejin Kim, Yirong Lin, Michael L. Curry, Jorge Gardea-Torresdey, Juan C. Noveron.
• Green synthesis of a highly efficient biosorbent for organic, pharmaceutical, and heavy metal pollutants removal: Engineering surface chemistry of polymeric biomass of spent coffee waste JOURNAL OF WATER PROCESS ENGINEERING 25 (2018), Md. A. Ahsan, Vahid Jabbari, Md. T. Islam, Hoejin Kim, Jose A. Hernandez-Viezcas, Yirong Lin, Carlos A. Diaz-Moreno, Jorge A. Lopez, Jorge Gardea-Torresdey, Juan C. Noveron.
• Green synthesis of a highly efficient biosorbent for organic, pharmaceutical, and heavy metal pollutants removal: Engineering surface chemistry of polymeric biomass of spent coffee waste JOURNAL OF WATER PROCESS ENGINEERING 25 (2018), Md. A. Ahsan, Vahid Jabbari, Md. T. Islam, Hoejin Kim, Jose A. Hernandez Viezcas, Yirong Lin, Carlos A. Diaz-Moreno, Jorge A. Lopez, Jorge Gardea-Torresdey, Juan C. Noveron.
• Part re-registration during process interruption of electron beam melting additive manufacturing INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY 96 1-4 (2018), Mohammad S. Hossain, Jorge Mireles, Philip A. Morton, Yirong Lin, Cesar Terrazas, Ryan B. Wicker.

No info available.

No info available.