FACULTY PROFILES

Saqlain Zaman

Research Associate
Aerospace and Mechanical Engineering

Office Building:
Office Room:
Phone:
Email: szaman3@miners.utep.edu

Bio

No info available.

Education

Ph D in Mechanical Engineering (In Progress), The University of Texas at El Paso (2024)

Publications

Paste extrusion‐based 3D printing of fiber‐reinforced ultra high‐temperature ceramics International Journal of Applied Ceramic Technology 22 2 (2025), Saqlain Zaman, Joseph I. Munoz, Laura Molina, Md S. Hassan, Md S. Mahmud, Joshua Z. Dantzler, Alexis Lopez, Dominic H. Austen, Evgeny Shafirovich, Shadman T. Nabil, Francisco Medina, Nicholas Ku, Lionel Vargas‐Gonzalez, Yirong Lin.
3D Printing of Continuous Carbon Fiber Reinforced Composites With Cyanate Ester Interpenetrating Polymer Networks for Enhanced Thermo-Mechanical Properties Polymer Composites (2025), Maisha Mesbah, Saqlain Zaman, Nicolas E. Herrera, Md S. Mahmud, Ali A. Mollick, Alexis Lopez, Joshua Dantzler, Sabina Arroyo, Tenzin Lhaden, Juan E. Urbay, others.
Additive manufacturing of textured barium titanate ceramics via shear force-induced platelet alignment International Journal of Ceramic Engineering \& Science 7 2 (2025), Alexis Lopez, Luis Rodriguez, Aaron Rodriguez, Sabina Arroyo, Alan Loera, Diana Fontes, Sofia Perez, Md S. Mahmud, Laura Molina, Saqlain Zaman, others.
Chemical aging and degradation of stereolithographic 3D-printed material: Effect of printing and post-curing parameters Polymer Degradation and Stability 232 (2025), Md S. Mahmud, Antonio Delgadillo, Juan E. Urbay, Md S. Hassan, Saqlain Zaman, Dominic Dieguez, Diana Fontes, Diana Leyva, Joshua Dantzler, Alexis Lopez, others.
Chemical aging and degradation of stereolithographic 3D-printed material: Effect of printing and post-curing parameters Polymer Degradation and Stability 232 (2025), Md S. Mahmud, Antonio Delgadillo, Juan E. Urbay, Md S. Hassan, Saqlain Zaman, Dominic Dieguez, Diana Fontes, Diana Leyva, Joshua Dantzler, Alexis Lopez, others.
Elucidation of the Nano-Mechanical Property Evolution of 3D-Printed Zirconia 5 2 (2025), Joshua Z. Dantzler, Diana H. Leyva, Amanda L. Borgaro, Md S. Mahmud, Alexis Lopez, Saqlain Zaman, Sabina Arroyo, Yirong Lin, Alba J. Leyva.
Piezoelectric ceramic-epoxy lattice structures: a hybrid manufacturing approach for enhanced electro-mechanical performance Advanced Composite Materials (2025), Joshua Z. Dantzler, Amanda L. Borgaro, Alexis Lopez, Sabina Arroyo, Saqlain Zaman, Tenzin Lhaden, Shajahan Mahmud, Ali A. Mollick, Yirong Lin.
Thermo-mechanical deterioration and molecular degradation of 3D-printed methacrylate-based polymer in various chemical environments Polymer Degradation and Stability 242 (2025), Md S. Mahmud, Juan E. Urbay, Antonio Delgadillo, Diana Fontes, Saqlain Zaman, Garcia, Xavier O Nieves, Alexis Lopez, Sarah N. Joyce, David A. Roberson, Katja Michael, others.
Thermo-mechanical deterioration and molecular degradation of 3D-printed methacrylate-based polymer in various chemical environments Polymer Degradation and Stability 242 (2025), Md S. Mahmud, Juan E. Urbay, Antonio Delgadillo, Diana Fontes, Saqlain Zaman, Garcia, Xavier O Nieves, Alexis Lopez, Sarah N. Joyce, David A. Roberson, Katja Michael, others.
Paste extrusion‐based 3D printing of fiber‐reinforced ultra high‐temperature ceramics International Journal of Applied Ceramic Technology (2024), Saqlain Zaman, Joseph I. Munoz, Laura Molina, Md S. Hassan, Md S. Mahmud, Joshua Z. Dantzler, Alexis Lopez, Dominic H. Austen, Evgeny Shafirovich, Shadman T. Nabil, Francisco Medina, Nicholas Ku, Lionel Vargas‐Gonzalez, Yirong Lin.
3D printing of cyanate ester resins with interpenetration networks for enhanced thermal and mechanical properties Journal of Applied Polymer Science 141 21 (2024), Saqlain Zaman, Sergio Favela, Nicolas E. Herrera, Alejandro Gandara, Laura Molina, Md. S. Hassan, Sofia G. Gomez, Jean E. Ramirez, Md. S. Mahmud, Ana C. Martinez Maciel, Alexis Maurel, Zhengtao Gan, Eric MacDonald, Yirong Lin.
3D printing of cyanate ester resins with interpenetration networks for enhanced thermal and mechanical properties Journal of Applied Polymer Science 141 21 (2024), Saqlain Zaman, Sergio Favela, Nicolas E. Herrera, Alejandro Gandara, Laura Molina, Md S. Hassan, Sofia G. Gomez, Jean E. Ramirez, Md S. Mahmud, Ana C. Martinez Maciel, Yirong Lin.
Design and evaluation of selective laser sintering of thermoset lattice structures Progress in Additive Manufacturing (2024), Md S. Mahmud, Md S. Hassan, Asahel Marinelarena-Diaz, Joshua Z. Dantzler, Saqlain Zaman, Prokash C. Roy, Dominic Dieguez, Diana Leyva, Alexis Lopez, Yirong Lin, others.
Paste extrusion-based 3D printing of fiber-reinforced ultra high-temperature ceramics International Journal of Applied Ceramic Technology (2024), Saqlain Zaman, Joseph I. Munoz, Laura Molina, Md S. Hassan, Md S. Mahmud, Joshua Z. Dantzler, Alexis Lopez, Dominic H. Austen, Evgeny Shafirovich, Shadman T. Nabil, others.
Paste extrusion-based 3D printing of fiber-reinforced ultra high-temperature ceramics International Journal of Applied Ceramic Technology (2024), Saqlain Zaman, Joseph I. Munoz, Laura Molina, Md S. Hassan, Md S. Mahmud, Joshua Z. Dantzler, Alexis Lopez, Dominic H. Austen, Evgeny Shafirovich, Yirong Lin, others.
Porous Polymer Structures with Tunable Mechanical Properties Using a Water Emulsion Ink Materials 17 5 (2024), Joshua Z. Dantzler, Sofia G. Gomez, Stephanie Gonzalez, Diego Gonzalez, Yirong Lin, Cory Marquez, Md S. Hassan, Saqlain Zaman, Alexis Lopez, Md S. Mahmud, others.
Shrinkage and deformation compensation in metal fused filament fabrication (mf3) sintered copper components using 3d scanning and inverse deformation Journal of Manufacturing Processes 121 (2024), Jean E. Montes-Ramirez, Alexis Lopez, Md S. Hassan, Joseph I. Munoz, Sabina Arroyo, Cory Marquez, Saqlain Zaman, Alan Nunez, Md S. Mahmud, Yirong Lin, others.
Fabrication and Characterization of Hollow Polysiloxane Microsphere Polymer Matrix Composites with Improved Energy Absorption Journal of Composites Science 7 3 (2023), Sofia G. Gomez, Andrea Irigoyen, Stephanie Gonzalez, Kevin Estala-Rodriguez, Evgeny Shafirovich, Md S. Hassan, Saqlain Zaman, Yirong Lin.

Presentations

No info available.

Grants

No info available.

Current/Future Courses

No info available.

Past Courses

Select Term:

Term	Course	Section	Syllabus
Fall 2023	MECH 3113 - Thermo-fluid Lab	14737
Fall 2023	MECH 3113 - Thermo-fluid Lab	14738

Course Evaluations

Term	Course	Section	Evaluation
Fall 2023	MECH 3113 - Thermo-fluid Lab	14737	Evaluation
Fall 2023	MECH 3113 - Thermo-fluid Lab	14738	Evaluation

Bio

No info available.

Ph D in Mechanical Engineering (In Progress), The University of Texas at El Paso (2024)

Publications

Paste extrusion‐based 3D printing of fiber‐reinforced ultra high‐temperature ceramics International Journal of Applied Ceramic Technology 22 2 (2025), Saqlain Zaman, Joseph I. Munoz, Laura Molina, Md S. Hassan, Md S. Mahmud, Joshua Z. Dantzler, Alexis Lopez, Dominic H. Austen, Evgeny Shafirovich, Shadman T. Nabil, Francisco Medina, Nicholas Ku, Lionel Vargas‐Gonzalez, Yirong Lin.
3D Printing of Continuous Carbon Fiber Reinforced Composites With Cyanate Ester Interpenetrating Polymer Networks for Enhanced Thermo-Mechanical Properties Polymer Composites (2025), Maisha Mesbah, Saqlain Zaman, Nicolas E. Herrera, Md S. Mahmud, Ali A. Mollick, Alexis Lopez, Joshua Dantzler, Sabina Arroyo, Tenzin Lhaden, Juan E. Urbay, others.
Additive manufacturing of textured barium titanate ceramics via shear force-induced platelet alignment International Journal of Ceramic Engineering \& Science 7 2 (2025), Alexis Lopez, Luis Rodriguez, Aaron Rodriguez, Sabina Arroyo, Alan Loera, Diana Fontes, Sofia Perez, Md S. Mahmud, Laura Molina, Saqlain Zaman, others.
Chemical aging and degradation of stereolithographic 3D-printed material: Effect of printing and post-curing parameters Polymer Degradation and Stability 232 (2025), Md S. Mahmud, Antonio Delgadillo, Juan E. Urbay, Md S. Hassan, Saqlain Zaman, Dominic Dieguez, Diana Fontes, Diana Leyva, Joshua Dantzler, Alexis Lopez, others.
Chemical aging and degradation of stereolithographic 3D-printed material: Effect of printing and post-curing parameters Polymer Degradation and Stability 232 (2025), Md S. Mahmud, Antonio Delgadillo, Juan E. Urbay, Md S. Hassan, Saqlain Zaman, Dominic Dieguez, Diana Fontes, Diana Leyva, Joshua Dantzler, Alexis Lopez, others.

Presentations

No info available.

Current/Future Courses

No info available.

Past Courses

Select Term:

Term

Fall 2023

Course

MECH 3113 - Thermo-fluid Lab

Section

14737

Syllabus

Term

Fall 2023

Course

MECH 3113 - Thermo-fluid Lab

Section

14738

Syllabus

Term

Fall 2023

Course

MECH 3113 - Thermo-fluid Lab

Section

14737

Evaluation

Term

Fall 2023

Course

MECH 3113 - Thermo-fluid Lab

Section

14738

Evaluation

Saqlain Zaman

Bio

Education

Scholarly and Creative Activity

Grants

Courses

Course Evaluations