UTEP Faculty Profiles

Main Content

Francisco Medina

Associate Professor
Aerospace and Mechanical Engineering

Office Building: Engineering Building
Office Room: 103
Phone: (915) 747-8342
Email: frmedina@utep.edu

Expertise: See Research Profile in Expertise Connector

Bio

No info available.

Education

Ph D in Material Science and Engineering , The University of Texas at El Paso (2013)
MS in Mechanical Engineering, The University of Texas at El Paso (2005)
BS in Mechanical Engineering, The University of Texas at El Paso (2000)

Publications

Analysis of Process Parameter Variations and Heat Treatment Effects on the Microstructure and Mechanical Properties of Inconel 718 Fabricated by Laser Powder Directed Energy Deposition (Lp-Ded) Advances in Industrial and Manufacturing Engineering 11 (2025), Anannya Doris, Dana Godinez, Edel G. Arrieta Hernandez, Lawrence E. Murr, Colton Katsarelis, Paul Gradl, Amit J. Lopes, Francisco Medina.
Paste extrusion‐based 3D printing of fiber‐reinforced ultra high‐temperature ceramics International Journal of Applied Ceramic Technology (2024), Saqlain Zaman, Joseph I. Munoz, Laura Molina, Md S. Hassan, Md S. Mahmud, Joshua Z. Dantzler, Alexis Lopez, Dominic H. Austen, Evgeny Shafirovich, Shadman T. Nabil, Francisco Medina, Nicholas Ku, Lionel Vargas‐Gonzalez, Yirong Lin.
Comparison of fatigue life behavior between 4-point and uniaxial loading for L-PBF Ti--6Al--4V after HIP treatments Results in Materials 22 (2024), DA Ariza, E Arrieta, Cristian Banuelos, Col\'on, BJ, LE Murr, RB Wicker, C Beamer, Francisco Medina.
Comparison of fatigue life behavior between 4-point and uniaxial loading for L-PBF Ti--6Al--4V after HIP treatments Results in Materials 22 (2024), DA Ariza, E Arrieta, Cristian Banuelos, Col\'on, BJ, LE Murr, RB Wicker, C Beamer, Francisco Medina.
Effect of two different point-based melt scanning strategies on the microstructure of as-built IN718 parts fabricated via EB-PBF System University of Texas at Austin (2024), ST Nabil, Cristian Banuelos, Gustavo Fierro, M Madigan, S Tin, E Arrieta, LE Murr, RB Wicker, Francisco Medina.
Effect of two different point-based melt scanning strategies on the microstructure of as-built IN718 parts fabricated via EB-PBF System University of Texas at Austin (2024), ST Nabil, Cristian Banuelos, Gustavo Fierro, M Madigan, S Tin, E Arrieta, LE Murr, RB Wicker, Francisco Medina.
Effects of Process Parameters and Process Defects on the Flexural Fatigue Life of Ti-6Al-4V Fabricated by Laser Powder Bed Fusion Materials 17 18 (2024), Brandon Ramirez, Cristian Banuelos, Alex De La Cruz, Shadman T. Nabil, Edel Arrieta, Lawrence E. Murr, Ryan B. Wicker, Francisco Medina.
Effects of Process Parameters and Process Defects on the Flexural Fatigue Life of Ti-6Al-4V Fabricated by Laser Powder Bed Fusion Materials 17 18 (2024), Brandon Ramirez, Cristian Banuelos, Alex De La Cruz, Shadman T. Nabil, Edel Arrieta, Lawrence E. Murr, Ryan B. Wicker, Francisco Medina.
Hot Isostatic Pressure Study of Microstructure on Electron Beam Meltin Tungsten University of Texas at Austin (2024), G Ornelas, J Lares, K Watanabe, E Arrieta, RB Wicker, Francisco Medina.
Hot Isostatic Pressure Study of Microstructure on Electron Beam Meltin Tungsten University of Texas at Austin (2024), G Ornelas, J Lares, K Watanabe, E Arrieta, RB Wicker, Francisco Medina.
Impact of machine parameters and wall thickness on microstructural characteristics and microhardness of laser powder bed fusion Inconel 718 parts following heat-treatment Results in Materials 23 (2024), Anannya Doris, Leslie Trujillo, Edel Arrieta, LE Murr, Paul Gradl, CC Katsarelis, Vasyl Hafiychuk, KR Wheeler, Ryan B. Wicker, Francisco Medina.
Impact of machine parameters and wall thickness on microstructural characteristics and microhardness of laser powder bed fusion Inconel 718 parts following heat-treatment Results in Materials 23 (2024), Anannya Doris, Leslie Trujillo, Edel Arrieta, LE Murr, Paul Gradl, CC Katsarelis, Vasyl Hafiychuk, KR Wheeler, Ryan B. Wicker, Francisco Medina.
Microstructure Refinement of Bulk Inconel 718 Parts During Fabrication with EB-PBF Using Scanning Strategies: Transition from Bidirectional-Raster to Stochastic Point-Based Melting Journal of Manufacturing and Materials Processing 8 6 (2024), Shadman T. Nabil, Cristian Banuelos, Michael E. Madigan, Sammy Tin, Jacob I. Rodriguez, Lawrence E. Murr, Ryan B. Wicker, Francisco Medina.
On the Mechanical Behavior of LP-DED C103 Thin-Wall Structures Metals 14 9 (2024), Col\'on, Brandon, Mehrdad Pourjam, Gabriel Demeneghi, Kavan Hazeli, Omar Mireles, Francisco Medina.
Parameter Development and Characterization of Laser Powder Directed Energy Deposition of Nb--Alloy C103 for Thin Wall Geometries Journal of Materials Research and Technology 30 May--June 2024 (2024), Brandon J. Col\'on, Kurtis I. Watanabe, Toren J., Hobbs, Carly J. Romnes, Omar R. Mireles, Lawrence E., Francisco M. Murr.
Paste extrusion-based 3D printing of fiber-reinforced ultra high-temperature ceramics International Journal of Applied Ceramic Technology (2024), Saqlain Zaman, Joseph I. Munoz, Laura Molina, Md S. Hassan, Md S. Mahmud, Joshua Z. Dantzler, Alexis Lopez, Dominic H. Austen, Evgeny Shafirovich, Shadman T. Nabil, others.
The Effects of Laser Misalignments in Multi-Laser Powder Bed Fusion Manufactured Inconel 718 University of Texas at Austin (2024), LA Marquez, E Arrieta, DA Ariza, RB Wicker, Francisco Medina.
The Effects of Laser Misalignments in Multi-Laser Powder Bed Fusion Manufactured Inconel 718 University of Texas at Austin (2024), LA Marquez, E Arrieta, DA Ariza, RB Wicker, Francisco Medina.
The Impact of Different HIP Treatment Cycles on Fatigue Behavior during 4-Point Bending of Additively Manufactured (AM) Ti-6Al-4V University of Texas at Austin (2024), DA Ariza, E Arrieta, Cristian Banuelos, Col\'on, B, RB Wicker, C Beamer, Francisco Medina.
The Impact of Different HIP Treatment Cycles on Fatigue Behavior during 4-Point Bending of Additively Manufactured (AM) Ti-6Al-4V University of Texas at Austin (2024), DA Ariza, E Arrieta, Cristian Banuelos, Col\'on, B, RB Wicker, C Beamer, Francisco Medina.
A comparison of the mechanical behavior of AlSi7Mg alloy produced through additive manufacturing and subjected to different heat treatment and aging conditions University of Texas at Austin (2023), K Caballero, VA Medrano, E Arrietam, J Merino, B Ruvalcaba, B Ramirez, J Diemann, LE Murr, RB Wicker, D Godfrey, others.
A comprehensive and comparative study of microstructure and mechanical properties for post-process heat treatment of AlSi7Mg alloy components fabricated in different laser powder bed fusion systems Journal of Materials Research and Technology 24 (2023), Victor A. Medrano, Edel Arrieta, Jorge Merino, Bryan Ruvalcaba, Kevin Caballero, Brandon Ramirez, Jacky Diemann, LE Murr, Ryan B. Wicker, Donald Godfrey, others.
Comparison of Surface Texture from Various Surface Morphology Techniques for Evaluating As-Built Ti6Al4V Laser Powder Bed Fusion University of Texas at Austin (2023), Alex De La Cruz, Francisco Medina, Edel Arrieta, Luke Weston, Mark Benedict, Theo Gibson.
Comparison of Surface Texture from Various Surface Morphology Techniques for Evaluating As-Built Ti6Al4V Laser Powder Bed Fusion University of Texas at Austin (2023), Alex De La Cruz, Francisco Medina, Edel Arrieta, Luke Weston, Mark Benedict, Theo Gibson.
EFFECTS OF DIFFERENT PARAMETERS ON DED HR-1 ON LOW CYCLE FATIGUE, TENSILE STRENGTH, AND MICROSTRUCTURE University of Texas at Austin (2023), J Lares, D Godinez, E Arrieta, Francisco Medina, Ryan B. Wicker, P Gradl, C Katsarelis.
EFFECTS OF DIFFERENT PARAMETERS ON DED HR-1 ON LOW CYCLE FATIGUE, TENSILE STRENGTH, AND MICROSTRUCTURE University of Texas at Austin (2023), J Lares, D Godinez, E Arrieta, Francisco Medina, Ryan B. Wicker, P Gradl, C Katsarelis.
EXPLORING IN718 ALLOY PRODUCTION WITH BI-DIRECTIONAL RASTER AND STOCHASTIC SPOT MELTING TECHNIQUES USING AN OPEN-SOURCE ELECTRON MELTING SYSTEM University of Texas at Austin (2023), ST Nabil, Cristian Banuelos, B Ramirez, A Cruz, KI Watanabe, E Arrieta, RB Wicker, Francisco Medina.
EXPLORING IN718 ALLOY PRODUCTION WITH BI-DIRECTIONAL RASTER AND STOCHASTIC SPOT MELTING TECHNIQUES USING AN OPEN-SOURCE ELECTRON MELTING SYSTEM University of Texas at Austin (2023), ST Nabil, Cristian Banuelos, B Ramirez, A Cruz, KI Watanabe, E Arrieta, RB Wicker, Francisco Medina.
Fatigue Endurance Investigation of Post-processed Surfaces of LPBF Ti-6Al-4V under Flexural Stress University of Texas at Austin (2023), Cristian Banuelos, B Ramirez, A De la Cruz, ST Nabil, EG Arrieta, RB Wicker, Francisco Medina.
Fatigue Endurance Investigation of Post-processed Surfaces of LPBF Ti-6Al-4V under Flexural Stress University of Texas at Austin (2023), Cristian Banuelos, B Ramirez, A De la Cruz, ST Nabil, EG Arrieta, RB Wicker, Francisco Medina.
Microstructural and microhardness variations of laser powder bed fusion (L-PBF) additively manufactured Inconel 718 due to machine variability and wall thickness for aerospace applications University of Texas at Austin (2023), Anannya Doris, I Trujillo, D Godinez, E Arrieta, RB Wicker, P Gradi, CC Katsarelis, Francisco Medina.
Microstructural and microhardness variations of laser powder bed fusion (L-PBF) additively manufactured Inconel 718 due to machine variability and wall thickness for aerospace applications University of Texas at Austin (2023), Anannya Doris, I Trujillo, D Godinez, E Arrieta, RB Wicker, P Gradi, CC Katsarelis, Francisco Medina.
RESIDUAL STRESS AND DEFORMATION ANALYSIS OF INCONEL 718 ACROSS VARYING OVERHANGS IN LASER POWDER BLOWN DIRECTED ENERGY DEPOSITION University of Texas at Austin (2023), AJ Hernandez, D Garcia, KI Watanabe, PR Gradl, K Wheeler, Halyna Hafiychuk, RB Wicker, Francisco Medina.
Assessment of intra-build variations in tensile strength in electron beam powder-bed fusion Ti--6AL--4V part 1: Effects of build height Materials Science and Engineering: A 849 (2022), Nicholas Derimow, Alejandro Romero, Aldo Rubio, Cesar Terrazas, Newell Moser, Orion L. Kafka, Jake T. Benzing, Francisco Medina, Ryan B. Wicker, Nikolas Hrabe.
Binder Jetting of 316L process simulation tools evaluation (2022), K Caballero, VA Medrano, E Arrieta, H Sandoval, RB Wicker, Francisco Medina.
Binder Jetting of 316L process simulation tools evaluation (2022), K Caballero, VA Medrano, E Arrieta, H Sandoval, RB Wicker, Francisco Medina.
Comparative Study of Additively Manufactured Inconel 625 In the As-Built and Heat-Treated Condition (2022), V Luna, L Trujillo, A Gamon, L Marquez, E Arrieta, LE Murr, RB Wicker, C Katsarelis, PR Gradl, Francisco Medina.
Comparative Study of Additively Manufactured Inconel 625 In the As-Built and Heat-Treated Condition (2022), V Luna, L Trujillo, A Gamon, L Marquez, E Arrieta, LE Murr, RB Wicker, C Katsarelis, PR Gradl, Francisco Medina.
Comparison of Multiple Heat Treatments by Observing Mechanical Properties and Microstructure of LPBF Fabricated Aluminum F357 (2022), Julio C. Diaz, K Caballero, VA Medrano, E Arrieta, M Benedict, D Godfrey, RB Wicker, Francisco Medina.
Comparison of Multiple Heat Treatments by Observing Mechanical Properties and Microstructure of LPBF Fabricated Aluminum F357 (2022), Julio C. Diaz, K Caballero, VA Medrano, E Arrieta, M Benedict, D Godfrey, RB Wicker, Francisco Medina.
Comprehensive and comparative heat treatment of additively manufactured Inconel 625 alloy and corresponding microstructures and mechanical properties Journal of Manufacturing and Materials Processing 6 5 (2022), Victoria Luna, Leslie Trujillo, Ariel Gamon, Edel Arrieta, Lawrence E. Murr, Ryan B. Wicker, Colton Katsarelis, Paul R. Gradl, Francisco Medina.
Comprehensive and comparative heat treatment of additively manufactured Inconel 625 alloy and corresponding microstructures and mechanical properties Journal of Manufacturing and Materials Processing 6 5 (2022), Victoria Luna, Leslie Trujillo, Ariel Gamon, Edel Arrieta, Lawrence E. Murr, Ryan B. Wicker, Colton Katsarelis, Paul R. Gradl, Francisco Medina.
Development of Laser Cladding Procedure through Experiment and Analysis Using Powder Blown Directed Energy Deposition (2022), D Garcia, KI Watanabe, L Marquez, E Arrieta, Ryan B. Wicker, Francisco Medina.
Development of Laser Cladding Procedure through Experiment and Analysis Using Powder Blown Directed Energy Deposition (2022), D Garcia, KI Watanabe, L Marquez, E Arrieta, Ryan B. Wicker, Francisco Medina.
Effect of Layer Thickness and Heat Treatment on Microstructure and Mechanical Properties of Alloy 625 Manufactured by Electron Beam Powder Bed Fusion Materials 15 21 (2022), Julio C. Diaz, Kurtis Watanabe, Aldo Rubio, Alex De La Cruz, Dana Godinez, Shadman T. Nabil, Lawrence E. Murr, Ryan B. Wicker, Edel Arrieta, Francisco Medina.
Effect of Layer Thickness and Heat Treatment on Microstructure and Mechanical Properties of Alloy 625 Manufactured by Electron Beam Powder Bed Fusion Materials 15 21 (2022), Julio C. Diaz, Kurtis Watanabe, Aldo Rubio, Alex De La Cruz, Dana Godinez, Shadman T. Nabil, Lawrence E. Murr, Ryan B. Wicker, Edel Arrieta, Francisco Medina.
Effect of Thermal Aging in the Fatigue Life of Hot Isostatic Pressed AlSi10Mg Fabricated by Laser Powder Bed Fusion (2022), ST Nabil, E Arrieta, RB Wicker, M Benedict, Francisco Medina.
Effect of Thermal Aging in the Fatigue Life of Hot Isostatic Pressed AlSi10Mg Fabricated by Laser Powder Bed Fusion (2022), ST Nabil, E Arrieta, RB Wicker, M Benedict, Francisco Medina.
Lightweight Additively Manufactured Bell Crank (2022), Carlos Rodriguez, Sol Barraza, Julio C. Diaz, Edel Arrieta, Alejandro Hernandez, Adam Hicks, Ryan B. Wicker, Francisco Medina.
Lightweight Additively Manufactured Bell Crank (2022), Carlos Rodriguez, Sol Barraza, Julio C. Diaz, Edel Arrieta, Alejandro Hernandez, Adam Hicks, Ryan B. Wicker, Francisco Medina.
Maturation of Additive Manufactured Aerospace Alloys and Development of Mechanical and Thermophysical Properties for Space Applications (2022), Alison Park, Paul Gradl, Colton Katsarelis, Omar Mireles, Brian West, Nima Shamsaei, Shuai Shao, Reza Ghiaasiaan, Shengmin Guo, Frank Medina.
Metal Additive Manufacturing Processes and Selection American Institute of Aeronautics and Astronautics, Inc. Reston, VA (2022), Paul R. Gradl, Christopher S. Protz, Megan Le Corre, Omar R. Mireles, Frank Medina, Michal Kottman, Mark Norfolk, Leo Ajdelsztajn, Paul Allison, Amy Elliott, others.
Microstructural Characterization of Laser Powder Bed Fusion (L-PBF) Additively Manufactured Inconel 718 for Aerospace Application (2022), Anannya Doris, L Trujillo, Dana Godinez, E Arrieta, RB Wicker, P Gradl, Francisco Medina.
Microstructural Characterization of Laser Powder Bed Fusion (L-PBF) Additively Manufactured Inconel 718 for Aerospace Application (2022), Anannya Doris, L Trujillo, Dana Godinez, E Arrieta, RB Wicker, P Gradl, Francisco Medina.
Study of Different Aging Conditions for Analysis of Microstructure and Mechanical Properties of F357 Alloy Fabricated in LPBF Printer (2022), VA Medrano, K Caballero, E Arrieta, M Benedict, RB Wicker, Francisco Medina.
Study of Different Aging Conditions for Analysis of Microstructure and Mechanical Properties of F357 Alloy Fabricated in LPBF Printer (2022), VA Medrano, K Caballero, E Arrieta, M Benedict, RB Wicker, Francisco Medina.
Additive Manufacture of Porous ZrC for NTP In-Core Insulators (2021), Omar Mireles, Ryan Wilkerson, Francisco Medina, Edel Arrieta.
Additive Manufacture of Porous ZrC for NTP In-Core Insulators (2021), Omar Mireles, Ryan Wilkerson, Francisco Medina, Edel Arrieta.
Investigation of microstructure and mechanical properties for Ti-6Al-4V alloy parts produced using non-spherical precursor powder by laser powder bed fusion Materials 14 11 (2021), Jaime Varela, Edel Arrieta, Muktesh Paliwal, Mike Marucci, Jose H. Sandoval, Jose A. Gonzalez, Brandon McWilliams, Lawrence E. Murr, Ryan B. Wicker, Francisco Medina.
Investigation of microstructure and mechanical properties for Ti-6Al-4V alloy parts produced using non-spherical precursor powder by laser powder bed fusion Materials 14 11 (2021), Jaime Varela, Edel Arrieta, Muktesh Paliwal, Mike Marucci, Jose H. Sandoval, Jose A. Gonzalez, Brandon McWilliams, Lawrence E. Murr, Ryan B. Wicker, Francisco Medina.
Microstructure and hardness comparison of as-built inconel 625 alloy following various additive manufacturing processes Results in Materials 12 (2021), Ariel Gamon, Edel Arrieta, Paul R. Gradl, Colton Katsarelis, Lawrence E. Murr, Ryan B. Wicker, Francisco Medina.
Microstructure and hardness comparison of as-built inconel 625 alloy following various additive manufacturing processes Results in Materials 12 (2021), Ariel Gamon, Edel Arrieta, Paul R. Gradl, Colton Katsarelis, Lawrence E. Murr, Ryan B. Wicker, Francisco Medina.
Multiple, comparative heat treatment and aging schedules for controlling the microstructures and mechanical properties of laser powder bed fusion fabricated AlSi10Mg alloy Journal of Materials Research and Technology 13 (2021), Jorge Merino, Bryan Ruvalcaba, Jaime Varela, Edel Arrieta, Lawrence E. Murr, Ryan B. Wicker, Mark Benedict, Francisco Medina.
Multiple, comparative heat treatment and aging schedules for controlling the microstructures and mechanical properties of laser powder bed fusion fabricated AlSi10Mg alloy Journal of Materials Research and Technology 13 (2021), Jorge Merino, Bryan Ruvalcaba, Jaime Varela, Edel Arrieta, Lawrence E. Murr, Ryan B. Wicker, Mark Benedict, Francisco Medina.
Sintered powder oxidation variation as a function of build height for titanium alloy produced by electron beam powder-bed fusion Additive Manufacturing Letters 1 (2021), Nicholas Derimow, Alejandro Romero, Aldo Rubio, Cesar Terrazas, Francisco Medina, Ryan B. Wicker, Nikolas Hrabe.
Extrusion-based additive manufacturing system for 3D structural electronic, electromagnetic and electromechanical components/devices (2020), Ryan B. Wicker, Eric MacDonald, Francisco Medina, David Espalin, Danny W. Muse.
Methods for connecting inter-layer conductors and components in 3D structures (2020), Ryan B. Wicker, Francisco Medina, Eric MacDonald, Danny W. Muse, David Espalin.
Air Particle Separator for Unmanned Aerial Vehicles with Combustion Engines Journal of Student Research 9 2 (2020), Adrian Belmontes, Francisco Medina.
Effects of altered hot isostatic pressing treatments on the microstructures and mechanical performance of electron beam melted Ti-6Al-4V Journal of Materials Research and Technology 9 4 (2020), Ahmad Abu-Issa, Miguel Lopez, Christina Pickett, Andres Escarcega, Edel Arrieta, Lawrence E. Murr, Ryan B. Wicker, Magnus Ahlfors, Don Godfrey, Francisco Medina.
Effects of altered hot isostatic pressing treatments on the microstructures and mechanical performance of electron beam melted Ti-6Al-4V Journal of Materials Research and Technology 9 4 (2020), Ahmad Abu-Issa, Miguel Lopez, Christina Pickett, Andres Escarcega, Edel Arrieta, Lawrence E. Murr, Ryan B. Wicker, Magnus Ahlfors, Don Godfrey, Francisco Medina.
Effects of postprocess hot isostatic pressing treatments on the mechanical performance of EBM fabricated TI-6Al-2Sn-4Zr-2Mo Materials 13 11 (2020), Miguel Lopez, Christina Pickett, Edel Arrieta, Lawrence E. Murr, Ryan B. Wicker, Magnus Ahlfors, Donald Godfrey, Francisco Medina.
Effects of postprocess hot isostatic pressing treatments on the mechanical performance of EBM fabricated TI-6Al-2Sn-4Zr-2Mo Materials 13 11 (2020), Miguel Lopez, Christina Pickett, Edel Arrieta, Lawrence E. Murr, Ryan B. Wicker, Magnus Ahlfors, Donald Godfrey, Francisco Medina.
Performance characterization of laser powder bed fusion fabricated Inconel 718 treated with experimental hot isostatic processing cycles Journal of Manufacturing and Materials Processing 4 3 (2020), Jaime Varela, Jorge Merino, Christina Pickett, Ahmad Abu-Issa, Edel Arrieta, Lawrence E. Murr, Ryan B. Wicker, Magnus Ahlfors, Donald Godfrey, Francisco Medina.

Presentations

No info available.

Grants

No info available.

Current/Future Courses

Term	Course	Section	Syllabus
Fall 2025	MECH 5353 - Adv 3D Eng & Additive Manufact	12958	Syllabus
Fall 2025	MECH 6353 - Adv 3D Eng & Additive Manufact	14058	Syllabus
Fall 2025	MASE 6398 - Dissertation	12126
Fall 2025	MASE 6399 - Dissertation	12444
Fall 2025	MECH 6398 - Dissertation I	13667
Fall 2025	MECH 6399 - Dissertation II	13684
Fall 2025	MECH 6396 - Doctoral Research	12111
Fall 2025	MECH 6396 - Doctoral Research	12506
Fall 2025	MECH 6396 - Doctoral Research	13065
Fall 2025	MECH 6396 - Doctoral Research	13067
Fall 2025	MECH 6396 - Doctoral Research	13722
Fall 2025	MECH 5396 - Graduate Projects	16462
Fall 2025	MECH 5397 - Graduate Projects	13985
Fall 2025	MECH 5397 - Graduate Projects	16463
Fall 2025	MME 5396 - Graduate Projects	13075
Fall 2025	MME 5397 - Graduate Projects	10011
Fall 2025	MME 5294 - Graduate Research	17057
Fall 2025	MME 5394 - Graduate Research	17058
Fall 2025	MASE 6194 - Graduate Research Projects	13210
Fall 2025	MASE 6294 - Graduate Research Projects	12964
Fall 2025	MASE 6394 - Graduate Research Projects	13250
Fall 2025	MASE 6191 - Individual Studies	14326
Fall 2025	MASE 6291 - Individual Studies	14347
Fall 2025	MASE 6391 - Individual Studies	13248
Fall 2025	MECH 5391 - Individual Studies	14888
Fall 2025	MECH 6391 - Individual Studies	18446
Fall 2025	MME 5191 - Individual Studies	17056
Fall 2025	MME 5391 - Individual Studies	11410
Fall 2025	MECH 5398 - Thesis	13034
Fall 2025	MECH 5399 - Thesis	13035
Fall 2025	MME 5398 - Thesis	10016
Fall 2025	MME 5399 - Thesis	11399
Fall 2025	EEL 5399 - Thesis II	16235

Past Courses

Select Term:

Term	Course	Section	Syllabus
Summer 2025	MECH 5355 - Design Studio II	32062
Summer 2025	MECH 6399 - Dissertation II	32498
Summer 2025	MECH 6396 - Doctoral Research	31825
Summer 2025	MECH 6396 - Doctoral Research	31836
Summer 2025	MECH 6396 - Doctoral Research	32119
Summer 2025	MECH 5396 - Graduate Projects	32658
Summer 2025	MECH 5398 - Thesis	32446
Summer 2025	MECH 5399 - Thesis	32457
Spring 2025	MECH 5354 - Design Studio I	26801	Syllabus
Spring 2025	MECH 6398 - Dissertation I	23465
Spring 2025	MECH 6396 - Doctoral Research	22814
Spring 2025	MECH 6396 - Doctoral Research	23265
Spring 2025	MECH 5352 - Dsg for 3D Eng & Additive Man	27893	Syllabus
Spring 2025	MECH 5391 - Individual Studies	26334
Spring 2025	MECH 4366 - Senior Design Project	28223
Spring 2025	MECH 5398 - Thesis	23463
Spring 2025	MECH 5399 - Thesis	23464
Spring 2025	MME 5398 - Thesis	27302
Fall 2024	MECH 5353 - Adv 3D Eng & Additive Manufact	13290
Fall 2024	MECH 6353 - Adv 3D Eng & Additive Manufact	14601
Fall 2024	MECH 6396 - Doctoral Research	17928
Fall 2024	MECH 6396 - Doctoral Research	17929
Fall 2024	MECH 5396 - Graduate Projects	17931
Fall 2024	BME 5394 - Graduate Research	18060
Fall 2024	MECH 1305 - Graphic & Design Fundamentals	10904	Syllabus
Fall 2024	MECH 1305 - Graphic & Design Fundamentals	11004	Syllabus
Fall 2024	MECH 5398 - Thesis	13379
Fall 2024	MECH 5399 - Thesis	13380
Fall 2024	EEL 5399 - Thesis II	17650
Summer 2024	MECH 5355 - Design Studio II	32260
Summer 2024	MECH 6399 - Dissertation II	32769
Summer 2024	MECH 6396 - Doctoral Research	32778
Summer 2024	MECH 6396 - Doctoral Research	32779
Summer 2024	MECH 5399 - Thesis	32728
Summer 2024	EEL 5398 - Thesis I	34173
Spring 2024	MECH 6398 - Dissertation I	23975
Spring 2024	MECH 6396 - Doctoral Research	23702
Spring 2024	MECH 6396 - Doctoral Research	23705
Spring 2024	MECH 1305 - Graphic & Design Fundamentals	21493	Syllabus
Spring 2024	MECH 1305 - Graphic & Design Fundamentals	21494	Syllabus
Spring 2024	MECH 5391 - Individual Studies	28008
Spring 2024	MECH 5391 - Individual Studies	28010
Spring 2024	MECH 5351 - Intro to 3D Eng & Additive Mfg	27635	Syllabus
Spring 2024	MECH 6351 - Intro to 3D Eng & Additive Mfg	26276
Spring 2024	BME 5399 - Thesis	27880
Spring 2024	MECH 5399 - Thesis	23974
Spring 2024	MME 5399 - Thesis	27526
Fall 2023	MECH 6396 - Doctoral Research	15153
Fall 2023	MECH 6396 - Doctoral Research	15154
Fall 2023	MECH 5397 - Graduate Projects	15526
Fall 2023	MECH 1305 - Graphic & Design Fundamentals	11049
Fall 2023	MECH 1305 - Graphic & Design Fundamentals	11636
Fall 2023	MECH 5391 - Individual Studies	17203
Fall 2023	MECH 5351 - Intro to 3D Eng & Additive Mfg	13890
Fall 2023	MECH 6351 - Intro to 3D Eng & Additive Mfg	15662
Fall 2023	MECH 4336 - Principles of Engr Design	13154
Fall 2023	BME 5398 - Thesis	17495
Fall 2023	MECH 5398 - Thesis	13987
Fall 2023	MECH 5399 - Thesis	13988
Fall 2023	MME 5399 - Thesis	11819
Summer 2023	MECH 5355 - Design Studio II	34469
Summer 2023	MECH 6396 - Doctoral Research	35463
Summer 2023	MECH 5391 - Individual Studies	36177
Summer 2023	MECH 5399 - Thesis	35183
Spring 2023	MECH 6396 - Doctoral Research	23499
Spring 2023	MECH 1305 - Graphic & Design Fundamentals	21627	Syllabus
Spring 2023	MECH 1305 - Graphic & Design Fundamentals	21628	Syllabus
Spring 2023	MME 5391 - Individual Studies	25796
Spring 2023	MECH 4366 - Senior Design Project	21648	Syllabus
Spring 2023	MECH 4366 - Senior Design Project	25245
Spring 2023	MECH 5398 - Thesis	24484
Spring 2023	MECH 5399 - Thesis	24485
Spring 2023	MME 5398 - Thesis	25246
Fall 2022	MECH 6396 - Doctoral Research	16871
Fall 2022	MECH 6396 - Doctoral Research	19746
Fall 2022	MECH 5397 - Graduate Projects	20321
Fall 2022	MECH 1305 - Graphic & Design Fundamentals	12125	Syllabus
Fall 2022	MECH 1305 - Graphic & Design Fundamentals	20293	Syllabus
Fall 2022	MECH 1305 - Graphic & Design Fundamentals	20317	Syllabus
Fall 2022	MECH 4336 - Principles of Engr Design	17795
Fall 2022	MECH 4366 - Senior Design Project	15840
Fall 2022	MECH 5398 - Thesis	17906
Fall 2022	MECH 5399 - Thesis	17907
Summer 2022	MECH 5355 - Design Studio II	35171
Summer 2022	MECH 5396 - Graduate Projects	36651
Summer 2022	MECH 5391 - Individual Studies	36614
Spring 2022	MECH 6396 - Doctoral Research	28016
Spring 2022	MECH 1305 - Graphic & Design Fundamentals	22887
Spring 2022	MME 5191 - Individual Studies	21757
Spring 2022	MECH 4366 - Senior Design Project	25416
Spring 2022	MECH 5398 - Thesis	26456
Spring 2022	RSRC 4033 - Undergraduate Research	25813
Fall 2021	MECH 4336 - Principles of Engr Design	15951
Fall 2021	MECH 4366 - Senior Design Project	18555
Fall 2021	MECH 5399 - Thesis	17682
Fall 2021	MME 5399 - Thesis	19764
Summer 2021	MECH 5398 - Thesis	36449
Spring 2021	MECH 4336 - Principles of Engr Design	26164
Spring 2021	MECH 4366 - Senior Design Project	26062
Spring 2021	MECH 5398 - Thesis	27430
Spring 2021	MECH 5399 - Thesis	27431
Spring 2021	MME 5398 - Thesis	29191
Fall 2020	MECH 6396 - Doctoral Research	17098
Fall 2020	MECH 5391 - Individual Studies	19910
Fall 2020	MECH 4336 - Principles of Engr Design	17934
Fall 2020	MECH 4366 - Senior Design Project	19561
Fall 2020	MECH 5398 - Thesis	18031
Fall 2020	MECH 5399 - Thesis	18032
Spring 2020	MECH 6396 - Doctoral Research	27766
Spring 2020	MECH 4336 - Principles of Engr Design	26517
Spring 2020	MECH 4366 - Senior Design Project	26774
Spring 2020	MECH 5398 - Thesis	29135
Spring 2020	MECH 5399 - Thesis	29136
Fall 2019	MECH 4336 - Principles of Engr Design	16744
Fall 2019	MECH 4366 - Senior Design Project	17913
Fall 2019	MECH 5398 - Thesis	19421
Spring 2019	MECH 4336 - Principles of Engr Design	28045
Spring 2019	MECH 4366 - Senior Design Project	27663
Fall 2018	MECH 4336 - Principles of Engr Design	17599

Course Evaluations

Term	Course	Section	Evaluation
Spring 2025	MECH 5354 - Design Studio I	26801	Evaluation
Spring 2025	MECH 5352 - Dsg for 3D Eng & Additive Man	27893	Evaluation
Fall 2024	MECH 5353 - Adv 3D Eng & Additive Manufact	13290	Evaluation
Fall 2024	MECH 6353 - Adv 3D Eng & Additive Manufact	14601	Evaluation
Fall 2024	MECH 1305 - Graphic & Design Fundamentals	10904	Evaluation
Fall 2024	MECH 1305 - Graphic & Design Fundamentals	11004	Evaluation
Summer 2024	MECH 5355 - Design Studio II	32260	Evaluation
Spring 2024	MECH 1305 - Graphic & Design Fundamentals	21493	Evaluation
Spring 2024	MECH 1305 - Graphic & Design Fundamentals	21494	Evaluation
Spring 2024	MECH 5351 - Intro to 3D Eng & Additive Mfg	27635	Evaluation
Spring 2024	MECH 6351 - Intro to 3D Eng & Additive Mfg	26276	Evaluation
Fall 2023	MECH 1305 - Graphic & Design Fundamentals	11049	Evaluation
Fall 2023	MECH 1305 - Graphic & Design Fundamentals	11636	Evaluation
Fall 2023	MECH 5351 - Intro to 3D Eng & Additive Mfg	13890	Evaluation
Summer 2023	MECH 5355 - Design Studio II	34469	Evaluation
Spring 2023	MECH 1305 - Graphic & Design Fundamentals	21627	Evaluation
Spring 2023	MECH 1305 - Graphic & Design Fundamentals	21628	Evaluation
Spring 2023	MECH 4366 - Senior Design Project	21648	Evaluation
Fall 2022	MECH 1305 - Graphic & Design Fundamentals	12125	Evaluation
Fall 2022	MECH 1305 - Graphic & Design Fundamentals	20293	Evaluation
Fall 2022	MECH 1305 - Graphic & Design Fundamentals	20317	Evaluation
Summer 2022	MECH 5355 - Design Studio II	35171	Evaluation
Spring 2022	MECH 1305 - Graphic & Design Fundamentals	22887	Evaluation
Spring 2022	MECH 4366 - Senior Design Project	25416	Evaluation
Fall 2021	MECH 4336 - Principles of Engr Design	15951	Evaluation
Fall 2021	MECH 4366 - Senior Design Project	18555	Evaluation
Spring 2021	MECH 4336 - Principles of Engr Design	26164	Evaluation
Spring 2021	MECH 4366 - Senior Design Project	26062	Evaluation
Fall 2020	MECH 4336 - Principles of Engr Design	17934	Evaluation
Fall 2020	MECH 4366 - Senior Design Project	19561	Evaluation
Spring 2020	MECH 4336 - Principles of Engr Design	26517	Evaluation
Spring 2020	MECH 4366 - Senior Design Project	26774	Evaluation

Bio

No info available.

Ph D in Material Science and Engineering , The University of Texas at El Paso (2013)
MS in Mechanical Engineering, The University of Texas at El Paso (2005)
BS in Mechanical Engineering, The University of Texas at El Paso (2000)

Publications

Analysis of Process Parameter Variations and Heat Treatment Effects on the Microstructure and Mechanical Properties of Inconel 718 Fabricated by Laser Powder Directed Energy Deposition (Lp-Ded) Advances in Industrial and Manufacturing Engineering 11 (2025), Anannya Doris, Dana Godinez, Edel G. Arrieta Hernandez, Lawrence E. Murr, Colton Katsarelis, Paul Gradl, Amit J. Lopes, Francisco Medina.
Paste extrusion‐based 3D printing of fiber‐reinforced ultra high‐temperature ceramics International Journal of Applied Ceramic Technology (2024), Saqlain Zaman, Joseph I. Munoz, Laura Molina, Md S. Hassan, Md S. Mahmud, Joshua Z. Dantzler, Alexis Lopez, Dominic H. Austen, Evgeny Shafirovich, Shadman T. Nabil, Francisco Medina, Nicholas Ku, Lionel Vargas‐Gonzalez, Yirong Lin.
Comparison of fatigue life behavior between 4-point and uniaxial loading for L-PBF Ti--6Al--4V after HIP treatments Results in Materials 22 (2024), DA Ariza, E Arrieta, Cristian Banuelos, Col\'on, BJ, LE Murr, RB Wicker, C Beamer, Francisco Medina.
Comparison of fatigue life behavior between 4-point and uniaxial loading for L-PBF Ti--6Al--4V after HIP treatments Results in Materials 22 (2024), DA Ariza, E Arrieta, Cristian Banuelos, Col\'on, BJ, LE Murr, RB Wicker, C Beamer, Francisco Medina.
Effect of two different point-based melt scanning strategies on the microstructure of as-built IN718 parts fabricated via EB-PBF System University of Texas at Austin (2024), ST Nabil, Cristian Banuelos, Gustavo Fierro, M Madigan, S Tin, E Arrieta, LE Murr, RB Wicker, Francisco Medina.

Presentations

No info available.

Current/Future Courses

Term

Fall 2025

Course

MECH 5353 - Adv 3D Eng & Additive Manufact

Section

12958

Syllabus

Term

Fall 2025

Course

MECH 6353 - Adv 3D Eng & Additive Manufact

Section

14058

Syllabus

Term

Fall 2025

Course

MASE 6398 - Dissertation

Section

12126

Syllabus

Term

Fall 2025

Course

MASE 6399 - Dissertation

Section

12444

Syllabus

Term

Fall 2025

Course

MECH 6398 - Dissertation I

Section

13667

Syllabus

Term

Fall 2025

Course

MECH 6399 - Dissertation II

Section

13684

Syllabus

Term

Fall 2025

Course

MECH 6396 - Doctoral Research

Section

12111

Syllabus

Term

Fall 2025

Course

MECH 6396 - Doctoral Research

Section

12506

Syllabus

Term

Fall 2025

Course

MECH 6396 - Doctoral Research

Section

13065

Syllabus

Term

Fall 2025

Course

MECH 6396 - Doctoral Research

Section

13067

Syllabus

Term

Fall 2025

Course

MECH 6396 - Doctoral Research

Section

13722

Syllabus

Term

Fall 2025

Course

MECH 5396 - Graduate Projects

Section

16462

Syllabus

Term

Fall 2025

Course

MECH 5397 - Graduate Projects

Section

13985

Syllabus

Term

Fall 2025

Course

MECH 5397 - Graduate Projects

Section

16463

Syllabus

Term

Fall 2025

Course

MME 5396 - Graduate Projects

Section

13075

Syllabus

Term

Fall 2025

Course

MME 5397 - Graduate Projects

Section

10011

Syllabus

Term

Fall 2025

Course

MME 5294 - Graduate Research

Section

17057

Syllabus

Term

Fall 2025

Course

MME 5394 - Graduate Research

Section

17058

Syllabus

Term

Fall 2025

Course

MASE 6194 - Graduate Research Projects

Section

13210

Syllabus

Term

Fall 2025

Course

MASE 6294 - Graduate Research Projects

Section

12964

Syllabus

Term

Fall 2025

Course

MASE 6394 - Graduate Research Projects

Section

13250

Syllabus

Term

Fall 2025

Course

MASE 6191 - Individual Studies

Section

14326

Syllabus

Term

Fall 2025

Course

MASE 6291 - Individual Studies

Section

14347

Syllabus

Term

Fall 2025

Course

MASE 6391 - Individual Studies

Section

13248

Syllabus

Term

Fall 2025

Course

MECH 5391 - Individual Studies

Section

14888

Syllabus

Term

Fall 2025

Course

MECH 6391 - Individual Studies

Section

18446

Syllabus

Term

Fall 2025

Course

MME 5191 - Individual Studies

Section

17056

Syllabus

Term

Fall 2025

Course

MME 5391 - Individual Studies

Section

11410

Syllabus

Term

Fall 2025

Course

MECH 5398 - Thesis

Section

13034

Syllabus

Term

Fall 2025

Course

MECH 5399 - Thesis

Section

13035

Syllabus

Term

Fall 2025

Course

MME 5398 - Thesis

Section

10016

Syllabus

Term

Fall 2025

Course

MME 5399 - Thesis

Section

11399

Syllabus

Term

Fall 2025

Course

EEL 5399 - Thesis II

Section

16235

Syllabus

Past Courses

Select Term:

Term

Summer 2025

Course

MECH 5355 - Design Studio II

Section

32062

Syllabus

Term

Summer 2025

Course

MECH 6399 - Dissertation II

Section

32498

Syllabus

Term

Summer 2025

Course

MECH 6396 - Doctoral Research

Section

31825

Syllabus

Term

Summer 2025

Course

MECH 6396 - Doctoral Research

Section

31836

Syllabus

Term

Summer 2025

Course

MECH 6396 - Doctoral Research

Section

32119

Syllabus

Term

Summer 2025

Course

MECH 5396 - Graduate Projects

Section

32658

Syllabus

Term

Summer 2025

Course

MECH 5398 - Thesis

Section

32446

Syllabus

Term

Summer 2025

Course

MECH 5399 - Thesis

Section

32457

Syllabus

Term

Spring 2025

Course

MECH 5354 - Design Studio I

Section

26801

Syllabus

Term

Spring 2025

Course

MECH 6398 - Dissertation I

Section

23465

Syllabus

Term

Spring 2025

Course

MECH 6396 - Doctoral Research

Section

22814

Syllabus

Term

Spring 2025

Course

MECH 6396 - Doctoral Research

Section

23265

Syllabus

Term

Spring 2025

Course

MECH 5352 - Dsg for 3D Eng & Additive Man

Section

27893

Syllabus

Term

Spring 2025

Course

MECH 5391 - Individual Studies

Section

26334

Syllabus

Term

Spring 2025

Course

MECH 4366 - Senior Design Project

Section

28223

Syllabus

Term

Spring 2025

Course

MECH 5398 - Thesis

Section

23463

Syllabus

Term

Spring 2025

Course

MECH 5399 - Thesis

Section

23464

Syllabus

Term

Spring 2025

Course

MME 5398 - Thesis

Section

27302

Syllabus

Term

Fall 2024

Course

MECH 5353 - Adv 3D Eng & Additive Manufact

Section

13290

Syllabus

Term

Fall 2024

Course

MECH 6353 - Adv 3D Eng & Additive Manufact

Section

14601

Syllabus

Term

Fall 2024

Course

MECH 6396 - Doctoral Research

Section

17928

Syllabus

Term

Fall 2024

Course

MECH 6396 - Doctoral Research

Section

17929

Syllabus

Term

Fall 2024

Course

MECH 5396 - Graduate Projects

Section

17931

Syllabus

Term

Fall 2024

Course

BME 5394 - Graduate Research

Section

18060

Syllabus

Term

Fall 2024

Course

MECH 1305 - Graphic & Design Fundamentals

Section

10904

Syllabus

Term

Fall 2024

Course

MECH 1305 - Graphic & Design Fundamentals

Section

11004

Syllabus

Term

Fall 2024

Course

MECH 5398 - Thesis

Section

13379

Syllabus

Term

Fall 2024

Course

MECH 5399 - Thesis

Section

13380

Syllabus

Term

Fall 2024

Course

EEL 5399 - Thesis II

Section

17650

Syllabus

Term

Summer 2024

Course

MECH 5355 - Design Studio II

Section

32260

Syllabus

Term

Summer 2024

Course

MECH 6399 - Dissertation II

Section

32769

Syllabus

Term

Summer 2024

Course

MECH 6396 - Doctoral Research

Section

32778

Syllabus

Term

Summer 2024

Course

MECH 6396 - Doctoral Research

Section

32779

Syllabus

Term

Summer 2024

Course

MECH 5399 - Thesis

Section

32728

Syllabus

Term

Summer 2024

Course

EEL 5398 - Thesis I

Section

34173

Syllabus

Term

Spring 2024

Course

MECH 6398 - Dissertation I

Section

23975

Syllabus

Term

Spring 2024

Course

MECH 6396 - Doctoral Research

Section

23702

Syllabus

Term

Spring 2024

Course

MECH 6396 - Doctoral Research

Section

23705

Syllabus

Term

Spring 2024

Course

MECH 1305 - Graphic & Design Fundamentals

Section

21493

Syllabus

Term

Spring 2024

Course

MECH 1305 - Graphic & Design Fundamentals

Section

21494

Syllabus

Term

Spring 2024

Course

MECH 5391 - Individual Studies

Section

28008

Syllabus

Term

Spring 2024

Course

MECH 5391 - Individual Studies

Section

28010

Syllabus

Term

Spring 2024

Course

MECH 5351 - Intro to 3D Eng & Additive Mfg

Section

27635

Syllabus

Term

Spring 2024

Course

MECH 6351 - Intro to 3D Eng & Additive Mfg

Section

26276

Syllabus

Term

Spring 2024

Course

BME 5399 - Thesis

Section

27880

Syllabus

Term

Spring 2024

Course

MECH 5399 - Thesis

Section

23974

Syllabus

Term

Spring 2024

Course

MME 5399 - Thesis

Section

27526

Syllabus

Term

Fall 2023

Course

MECH 6396 - Doctoral Research

Section

15153

Syllabus

Term

Fall 2023

Course

MECH 6396 - Doctoral Research

Section

15154

Syllabus

Term

Fall 2023

Course

MECH 5397 - Graduate Projects

Section

15526

Syllabus

Term

Fall 2023

Course

MECH 1305 - Graphic & Design Fundamentals

Section

11049

Syllabus

Term

Fall 2023

Course

MECH 1305 - Graphic & Design Fundamentals

Section

11636

Syllabus

Term

Fall 2023

Course

MECH 5391 - Individual Studies

Section

17203

Syllabus

Term

Fall 2023

Course

MECH 5351 - Intro to 3D Eng & Additive Mfg

Section

13890

Syllabus

Term

Fall 2023

Course

MECH 6351 - Intro to 3D Eng & Additive Mfg

Section

15662

Syllabus

Term

Fall 2023

Course

MECH 4336 - Principles of Engr Design

Section

13154

Syllabus

Term

Fall 2023

Course

BME 5398 - Thesis

Section

17495

Syllabus

Term

Fall 2023

Course

MECH 5398 - Thesis

Section

13987

Syllabus

Term

Fall 2023

Course

MECH 5399 - Thesis

Section

13988

Syllabus

Term

Fall 2023

Course

MME 5399 - Thesis

Section

11819

Syllabus

Term

Summer 2023

Course

MECH 5355 - Design Studio II

Section

34469

Syllabus

Term

Summer 2023

Course

MECH 6396 - Doctoral Research

Section

35463

Syllabus

Term

Summer 2023

Course

MECH 5391 - Individual Studies

Section

36177

Syllabus

Term

Summer 2023

Course

MECH 5399 - Thesis

Section

35183

Syllabus

Term

Spring 2023

Course

MECH 6396 - Doctoral Research

Section

23499

Syllabus

Term

Spring 2023

Course

MECH 1305 - Graphic & Design Fundamentals

Section

21627

Syllabus

Term

Spring 2023

Course

MECH 1305 - Graphic & Design Fundamentals

Section

21628

Syllabus

Term

Spring 2023

Course

MME 5391 - Individual Studies

Section

25796

Syllabus

Term

Spring 2023

Course

MECH 4366 - Senior Design Project

Section

21648

Syllabus

Term

Spring 2023

Course

MECH 4366 - Senior Design Project

Section

25245

Syllabus

Term

Spring 2023

Course

MECH 5398 - Thesis

Section

24484

Syllabus

Term

Spring 2023

Course

MECH 5399 - Thesis

Section

24485

Syllabus

Term

Spring 2023

Course

MME 5398 - Thesis

Section

25246

Syllabus

Term

Fall 2022

Course

MECH 6396 - Doctoral Research

Section

16871

Syllabus

Term

Fall 2022

Course

MECH 6396 - Doctoral Research

Section

19746

Syllabus

Term

Fall 2022

Course

MECH 5397 - Graduate Projects

Section

20321

Syllabus

Term

Fall 2022

Course

MECH 1305 - Graphic & Design Fundamentals

Section

12125

Syllabus

Term

Fall 2022

Course

MECH 1305 - Graphic & Design Fundamentals

Section

20293

Syllabus

Term

Fall 2022

Course

MECH 1305 - Graphic & Design Fundamentals

Section

20317

Syllabus

Term

Fall 2022

Course

MECH 4336 - Principles of Engr Design

Section

17795

Syllabus

Term

Fall 2022

Course

MECH 4366 - Senior Design Project

Section

15840

Syllabus

Term

Fall 2022

Course

MECH 5398 - Thesis

Section

17906

Syllabus

Term

Fall 2022

Course

MECH 5399 - Thesis

Section

17907

Syllabus

Term

Summer 2022

Course

MECH 5355 - Design Studio II

Section

35171

Syllabus

Term

Summer 2022

Course

MECH 5396 - Graduate Projects

Section

36651

Syllabus

Term

Summer 2022

Course

MECH 5391 - Individual Studies

Section

36614

Syllabus

Term

Spring 2022

Course

MECH 6396 - Doctoral Research

Section

28016

Syllabus

Term

Spring 2022

Course

MECH 1305 - Graphic & Design Fundamentals

Section

22887

Syllabus

Term

Spring 2022

Course

MME 5191 - Individual Studies

Section

21757

Syllabus

Term

Spring 2022

Course

MECH 4366 - Senior Design Project

Section

25416

Syllabus

Term

Spring 2022

Course

MECH 5398 - Thesis

Section

26456

Syllabus

Term

Spring 2022

Course

RSRC 4033 - Undergraduate Research

Section

25813

Syllabus

Term

Fall 2021

Course

MECH 4336 - Principles of Engr Design

Section

15951

Syllabus

Term

Fall 2021

Course

MECH 4366 - Senior Design Project

Section

18555

Syllabus

Term

Fall 2021

Course

MECH 5399 - Thesis

Section

17682

Syllabus

Term

Fall 2021

Course

MME 5399 - Thesis

Section

19764

Syllabus

Term

Summer 2021

Course

MECH 5398 - Thesis

Section

36449

Syllabus

Term

Spring 2021

Course

MECH 4336 - Principles of Engr Design

Section

26164

Syllabus

Term

Spring 2021

Course

MECH 4366 - Senior Design Project

Section

26062

Syllabus

Term

Spring 2021

Course

MECH 5398 - Thesis

Section

27430

Syllabus

Term

Spring 2021

Course

MECH 5399 - Thesis

Section

27431

Syllabus

Term

Spring 2021

Course

MME 5398 - Thesis

Section

29191

Syllabus

Term

Fall 2020

Course

MECH 6396 - Doctoral Research

Section

17098

Syllabus

Term

Fall 2020

Course

MECH 5391 - Individual Studies

Section

19910

Syllabus

Term

Fall 2020

Course

MECH 4336 - Principles of Engr Design

Section

17934

Syllabus

Term

Fall 2020

Course

MECH 4366 - Senior Design Project

Section

19561

Syllabus

Term

Fall 2020

Course

MECH 5398 - Thesis

Section

18031

Syllabus

Term

Fall 2020

Course

MECH 5399 - Thesis

Section

18032

Syllabus

Term

Spring 2020

Course

MECH 6396 - Doctoral Research

Section

27766

Syllabus

Term

Spring 2020

Course

MECH 4336 - Principles of Engr Design

Section

26517

Syllabus

Term

Spring 2020

Course

MECH 4366 - Senior Design Project

Section

26774

Syllabus

Term

Spring 2020

Course

MECH 5398 - Thesis

Section

29135

Syllabus

Term

Spring 2020

Course

MECH 5399 - Thesis

Section

29136

Syllabus

Term

Fall 2019

Course

MECH 4336 - Principles of Engr Design

Section

16744

Syllabus

Term

Fall 2019

Course

MECH 4366 - Senior Design Project

Section

17913

Syllabus

Term

Fall 2019

Course

MECH 5398 - Thesis

Section

19421

Syllabus

Term

Spring 2019

Course

MECH 4336 - Principles of Engr Design

Section

28045

Syllabus

Term

Spring 2019

Course

MECH 4366 - Senior Design Project

Section

27663

Syllabus

Term

Fall 2018

Course

MECH 4336 - Principles of Engr Design

Section

17599

Syllabus

Term

Spring 2025

Course

MECH 5354 - Design Studio I

Section

26801

Evaluation

Term

Spring 2025

Course

MECH 5352 - Dsg for 3D Eng & Additive Man

Section

27893

Evaluation

Term

Fall 2024

Course

MECH 5353 - Adv 3D Eng & Additive Manufact

Section

13290

Evaluation

Term

Fall 2024

Course

MECH 6353 - Adv 3D Eng & Additive Manufact

Section

14601

Evaluation

Term

Fall 2024

Course

MECH 1305 - Graphic & Design Fundamentals

Section

10904

Evaluation

Term

Fall 2024

Course

MECH 1305 - Graphic & Design Fundamentals

Section

11004

Evaluation

Term

Summer 2024

Course

MECH 5355 - Design Studio II

Section

32260

Evaluation

Term

Spring 2024

Course

MECH 1305 - Graphic & Design Fundamentals

Section

21493

Evaluation

Term

Spring 2024

Course

MECH 1305 - Graphic & Design Fundamentals

Section

21494

Evaluation

Term

Spring 2024

Course

MECH 5351 - Intro to 3D Eng & Additive Mfg

Section

27635

Evaluation

Term

Spring 2024

Course

MECH 6351 - Intro to 3D Eng & Additive Mfg

Section

26276

Evaluation

Term

Fall 2023

Course

MECH 1305 - Graphic & Design Fundamentals

Section

11049

Evaluation

Term

Fall 2023

Course

MECH 1305 - Graphic & Design Fundamentals

Section

11636

Evaluation

Term

Fall 2023

Course

MECH 5351 - Intro to 3D Eng & Additive Mfg

Section

13890

Evaluation

Term

Summer 2023

Course

MECH 5355 - Design Studio II

Section

34469

Evaluation

Term

Spring 2023

Course

MECH 1305 - Graphic & Design Fundamentals

Section

21627

Evaluation

Term

Spring 2023

Course

MECH 1305 - Graphic & Design Fundamentals

Section

21628

Evaluation

Term

Spring 2023

Course

MECH 4366 - Senior Design Project

Section

21648

Evaluation

Term

Fall 2022

Course

MECH 1305 - Graphic & Design Fundamentals

Section

12125

Evaluation

Term

Fall 2022

Course

MECH 1305 - Graphic & Design Fundamentals

Section

20293

Evaluation

Term

Fall 2022

Course

MECH 1305 - Graphic & Design Fundamentals

Section

20317

Evaluation

Term

Summer 2022

Course

MECH 5355 - Design Studio II

Section

35171

Evaluation

Term

Spring 2022

Course

MECH 1305 - Graphic & Design Fundamentals

Section

22887

Evaluation

Term

Spring 2022

Course

MECH 4366 - Senior Design Project

Section

25416

Evaluation

Term

Fall 2021

Course

MECH 4336 - Principles of Engr Design

Section

15951

Evaluation

Term

Fall 2021

Course

MECH 4366 - Senior Design Project

Section

18555

Evaluation

Term

Spring 2021

Course

MECH 4336 - Principles of Engr Design

Section

26164

Evaluation

Term

Spring 2021

Course

MECH 4366 - Senior Design Project

Section

26062

Evaluation

Term

Fall 2020

Course

MECH 4336 - Principles of Engr Design

Section

17934

Evaluation

Term

Fall 2020

Course

MECH 4366 - Senior Design Project

Section

19561

Evaluation

Term

Spring 2020

Course

MECH 4336 - Principles of Engr Design

Section

26517

Evaluation

Term

Spring 2020

Course

MECH 4366 - Senior Design Project

Section

26774

Evaluation

FACULTY PROFILES

Quick Links

Francisco Medina

FACULTY PROFILES

Francisco Medina

Bio

Education

Scholarly and Creative Activity

Grants

Courses

Course Evaluations